DIRECTION TO USE

• Surfaces must be clean and free of dust and grease but may be humid.

• Wear protective gloves and safety goggle.

• Cover unprotected areas with Black Wolf masking tape.

• Screw applicator onto the valve.

• Shake thoroughly at least 2 to 4 minutes.

• Spray water to make surface humid. When filling large voids, spray Black wolf PU Foam Insulation and between each layer spray water to make surface humid fill cavities about 50% as Black Wolf PU Foam Insulation Sealant will continue to expand for several hours.

• Spray foam with the valve pointed downward for maximum yield.

• Remove uncured foam with acetone immediately after use. Cured Foam cannot be cleaned with solvents. Use abrasives (sanding paper) to Remove Cured foam. Cured foam is not harmful.

• Do not apply Black Wolf PU Foam Insulation Sealant into close cavities.